Back to Blog
Buying Guides 2026-11-16 Physiotherapy & Electrotherapy Equipment | Balego 0 views

Richmar HydraHeat Hot Packs: Choosing the Right Size for HydraTherm

Richmar HydraHeat Hot Packs: Choosing the Right Size for HydraTherm

Compare the five Richmar HydraHeat hot pack sizes by shape and coverage, and learn which fits your HydraTherm setup for back, neck, or general use.

Start with the body area, not the pack name

Richmar HydraHeat Hot Packs come in five shapes, and the right choice depends on where you plan to apply moist heat and how much area you need to cover. The packs are sold individually, so you can build a small set around your most common applications rather than buying a full assortment at once.

All five models share the same nonporous polymer exterior, are designed for water immersion between 120°F and 140°F (48–60°C), and require a towel or towel layers between the pack and the patient. The differences come down to footprint and contour.

The five HydraHeat shapes compared

Use this table to match the pack's dimensions and profile to the area you want to treat. Model numbers are included so you can confirm the exact variant when ordering.

  • HP-1210-ST Standard (12" × 10"): The smallest general-purpose rectangle. A good starting point for smaller treatment areas or for clinicians who want a compact pack that is easy to position.
  • HP-1711-LG Large (17" × 11"): A larger rectangle that covers more area than the Standard. Suitable when you need broader coverage on the back or other large regions.
  • HP-1713-OS Oversize (17" × 13"): The widest rectangular option. Choose this when maximum rectangular coverage is the priority and the treatment area can accommodate the extra width.
  • HP-1905-UN Universal (19" × 5"): Long and narrow. Useful when an elongated footprint is easier to position, such as along a limb or across a narrower area.
  • HP-1711-CX Cervical (17" × 11"): A neck-contour shape designed specifically for curved cervical positioning. It shares nominal dimensions with the Large pack, but the contoured profile is what sets it apart.

Large vs. Cervical: same dimensions, different job

The Large and Cervical packs both have nominal 17" × 11" dimensions, so size alone does not distinguish them. The difference is shape: the Large is a general rectangle for broad coverage, while the Cervical is contoured for the neck and cervical region. If you are choosing a pack for neck and shoulder application, the Cervical model's curved profile is designed to sit more naturally around that area. For general back coverage, the Large or Oversize rectangular packs are the more direct fit.

A size for the back may not be the size for the neck

When readers ask about a hot pack size for the back, the answer depends on the area you need to cover and how the pack will be secured. The Oversize (17" × 13") offers the widest rectangular coverage, while the Large (17" × 11") is a step smaller. The Universal (19" × 5") gives length rather than width, which can suit elongated areas but may not provide the breadth some back applications need.

For neck and shoulder use, the Cervical pack's contoured shape is the most targeted option in the line. The Standard (12" × 10") can work for smaller or more localized areas, but it offers less coverage than the larger rectangles.

Heating and compatibility facts that affect your choice

  • Richmar HydraHeat Hot Packs | 5 Sizes for HydraTherm: HydraHeat Packs are designed to be heated while fully submerged in water maintained between 120°F and 140°F (48–60°C). Your heating unit must be able to hold this range. A tank running permanently at a higher temperature should not be assumed compatible just because the pack fits inside.
    Richmar HydraHeat Hot Packs | 5 Sizes for HydraTherm
    Richmar HydraHeat Hot Packs | 5 Sizes for HydraTherm
  • Richmar HydraHeat Hot Packs | 5 Sizes for HydraTherm: The manufacturer's instructions require a minimum of 20 minutes fully submerged before use. Plan your workflow around this conditioning time, especially if you rotate packs between patients.
  • Richmar HydraHeat Hot Packs | 5 Sizes for HydraTherm: HydraHeat Packs should never be applied directly to skin; a towel or towel layers are required between the pack and the patient. Factor in a supply of towels or barrier layers alongside your pack purchase.
  • Richmar HydraHeat Hot Packs | 5 Sizes for HydraTherm: Richmar recommends its HydraTherm Deluxe Moist Heat Therapy System for the complete HydraHeat workflow, and the Deluxe is designed around up to a 12-pack inventory. If you are building a new moist-heat station, the Deluxe configuration with a 12-pack assortment may be more efficient than buying packs individually.

Cleaning and storage differences worth knowing

HydraHeat Packs use a nonporous, wipe-clean polymer exterior rather than the woven fabric shell of traditional clay or bentonite packs. Richmar directs users to clean the surface with a non-chlorinated, non-abrasive wipe before returning the pack to the heating unit. If a pack will not be used for an extended period, the manufacturer recommends removing it from the water and storing it dry and flat rather than leaving it in the tank indefinitely.

These care steps are part of the product's intended workflow, so choose a pack size you can realistically maintain according to those instructions.

What the supplied information does not settle

The supplied records do not include clinical recommendations for specific conditions or body types, nor do they specify a maximum number of packs per patient session. Selection should be based on the coverage and contour needs described above, and on compatibility with your heating equipment as confirmed by the manufacturer's instructions for both the heater and the pack.

Related Articles

Customer Service
Home
Products
Cart
Profile