How to Set Up Your HydraTherm Deluxe Moist Heat Unit

Quick Answer

To set up your HydraTherm Deluxe, fill the composite polymer tank with distilled water to the fill line, plug it in, set the digital thermostat to the desired temperature (typically 160–170°F), and wait for the unit to heat before adding moist heat packs.

Step-by-Step Setup for Your HydraTherm Deluxe

1. Fill the Tank with Distilled Water: Open the lid and pour distilled water into the composite polymer tank until it reaches the marked fill line. Do not use tap water—minerals can damage the low-water sensor and reduce heating efficiency. Check the fill line before turning on; overfilling can trigger the safety sensor.
2. Plug In and Set the Digital Thermostat: Connect the power cord to a grounded outlet. Press the power button, then use the arrow keys to set the thermostat to your target temperature—typically 160–170°F for moist heat therapy. Wait for the unit to reach temperature before adding packs. Let the water fully heat (about 20–30 minutes) before inserting packs to avoid temperature drops.
3. Add Moist Heat Packs and Monitor Safety: Once the water is at temperature, submerge your moist heat packs (up to 12) in the tank. Ensure the low-water safety sensor remains submerged. Close the lid and allow packs to heat for 10–15 minutes. Do not leave the unit unattended during first use. If the sensor triggers, turn off the unit, check the water level, and refill if needed before restarting.

Product Facts

• Richmar HydraTherm Deluxe Moist Heat Therapy Unit | 12-Pack Capacity: The HydraTherm Deluxe features a composite polymer tank and an adjustable digital thermostat. The polymer tank heats more evenly than stainless steel, but you must use distilled water and set the thermostat correctly to prevent mineral buildup and ensure safe operation.